Loading ...
Loading ...
Loading ...
14
SC2 Owner’s Manual
Turning the power on/off
WARNING
Use the specified adaptor (page 42) only. Use of other adaptors may result in irreparable damage to both the adaptor
and the instrument.
CAUTION
When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or
malfunction occurs, immediately turn the power off and disconnect the plug from the outlet.
NOTE
When disconnecting the AC adaptor, first turn the power off, and then follow the order shown above in reverse.
CAUTION
Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you
are not using the instrument for a long time or during electrical storms, make sure you unplug the AC power plug
from the wall AC outlet.
1
Connect the plugs of the AC adaptor in the order shown in the illustration.
Depending on the piano type, the DC IN jack is located at either of the following positions.
Make sure to loop the power cord through the hook attached to the rear of the piano or behind the
control unit.
1-2
1-1
1-3
1-4
1-2
1-4
1-1
1-3
DC IN jack
Hook is located on
the rear of the piano.
AC
adaptor
Power cord
AC plug
AC outlet
The shape of the plug and outlet differ depending on your locale.
(Bottom of the control unit)
[DC IN 16V] jack
AC outlet
AC plug
Power cord
AC
adaptor
The hook is behind the
control unit.
2
Press the [P] (Standby/On) switch to turn
the power on.
The [P] (Standby/On) lamp lights up.
To turn the power off, press the switch again.
NOTE
The sound will not be properly output if a key was pressed when the power was turned on. Do not touch any keys
when turning the power on.
Loading ...
Loading ...
Loading ...