Loading ...
Loading ...
Loading ...
– 8
Note:
Do not use highly foaming detergents.
Observe the dosing notes.
Swivel up the carrying handle of the
waste water tank.
Lift out the waste water tank and put
it aside.
Remove the lid from the fresh water
reservoir.
Fill in fresh water (maximum 50 °C).
Add detergent. Follow dosing in-
structions for detergent.
Recommended detergents:
Detergents are available in specialised
stores.
Close the cover of the fresh water
reservoir.
Place the waste water tank on the
appliance.
Release the star knob for the height
adjustment of the push rod.
Adjust the push handle to the de-
sired height.
Tighten the star handle.
Adjust the dosing of the cleaning
solution in accordance with the soil-
ing and the type of the flooring ma-
terial.
Bring the Eco mode switch into the
desired position.
Normal operation: The appliance
works at the maximum brush speed
and the highest suction perfor-
mance.
Eco: The appliance works at re-
duced brush speed and suction
performance. This also reduces the
energy consumption. The possible
action time with one charging cycle
increases.
ATTENTION
Risk of damage to the floor covering.
Do not operate the appliance on the
spot.
Risk of damage. Lift the vacuum bar
before pulling the appliance backwards
over a longer distance.
Set the appliance switch to "I".
Switch on "Detergent" button.
Push the pedal of the suction bar
lifting device simultaneously down
and to the left and allow it to go up
in order to lower the suction bar.
Pull the safety switch towards the
push handle, the brush drive and
the application of the cleaning solu-
tion are switched on (if preset).
Move the appliance over the sur-
face to be cleaned.
Release the safety switch.
Drive the appliance forward for an-
other 1-2 m to draw off residual wa-
ter.
Push down the pedal of the vacuum
bar lifting device to raise the vacu-
um bar.
Set the appliance switch to "0".
Application Detergent
Regular cleaning
(even for floors sensi-
tive to alkalies)
RM 745
RM 746
Cleaning dirt from
grease
RM 69 ES ASF
RM 69 ASF
Basic cleaning (strip-
ping) of alkali-resistant
hard coatings
RM 752
Basic cleaning (strip-
ping) linoleum
RM 754
Base cleaner, acidic RM 751
Disinfection cleaning RM 732
Settings
Cleaning
Shutting Down the Appliance
10 EN
Loading ...
Loading ...
Loading ...