Philips GC1121/02

User Manual - Page 6

For GC1121/02.

PDF File Manual, 48 pages, Read Online | Download pdf file

GC1121/02 photo
Loading ...
Loading ...
Loading ...
General description
A Spray nozzle (GC1121/1120/1115/1015)
B Filling opening
C Spray button T (GC1121/1120/1115/1015)
D Steam control
- O = no steam
- q = moderate steam
- w = maximum steam
- x = Calc-Clean function
E Extra-steam function (press steam control) (GC1121/1120)
F Temperature dial
G Temperature light
H Cord
I Type plate
J Water tank
Important
Read these instructions for use carefully before using the appliance and save them for future
reference.
Check if the voltage indicated on the type plate corresponds to the local mains voltage
before you connect the appliance.
Only connect the appliance to an earthed wall socket.
Do not use the appliance if the plug, the cord or the appliance itself shows visible damage, or
if the appliance has been dropped or is leaking.
Check the cord regularly for possible damage.
If the mains cord is damaged, always have it replaced by one of the original type in order to
avoid a hazard.
Never leave the appliance unattended when it is connected to the mains.
Never immerse the iron and the stand, if provided, in water.
Keep the appliance out of the reach of children.
The soleplate of the iron can become extremely hot and may cause burns if touched.
Do not allow the cord to come into contact with the soleplate when it is hot.
When you have finished ironing, when you clean the appliance, when you fill or empty the
water tank and also when you leave the iron even for a short while: set the steam control to
position O, put the iron on its heel and remove the mains plug from the wall socket.
Always place and use the iron and the stand, if provided, on a stable, level and horizontal
surface.
Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the
water tank.
This appliance is intended for household use only.
Before first use
1 Remove any sticker or protective foil from the soleplate.
2 Let the iron heat up to maximum temperature and pass the iron over a piece of damp cloth
for several minutes to remove any residues from the soleplate.
B
The iron may give off some smoke when you use it for the first time.This will cease after a short
while.
ENGLISH6
Loading ...
Loading ...
Loading ...