Loading ...
Loading ...
Loading ...
©2020 Hestan Commercial Corporation
4
EN
This mounting style has all the appliance doors flush to each other (wall oven + warming drawer
+ microwave) ANDAND the appliance doors
AREARE
inset into the cabinetry - allowing the appliance
doors and face-frames to all be flush.
THE CABINET MUSTMUST BE BUILT TO A MINIMUM MINIMUM DEPTH OF 24-1/2”24-1/2” (not
including the face-frame, which is typically 3/4” thick). Follow the
installation instructions for each appliance and kit for location of electrical
supply / outlets.
The arrangement shown features the following products and kits:
Convection Microwave KMWC24
Microwave Built-In Kit AKMWCK30
Microwave Flush-Mount Kit AKMWFK
Single Wall Oven KSO30
Warming Drawer KWD30
This arrangement will leave different vertical gaps between each appliance door face due to
the ventilation requirements for each appliance. Please note the use of a 1-3/4” wood spacer
beneath the Microwave Built-In Kit, ANDAND a 25/32” wood spacer beneath the Warming Drawer.
These spacers are needed for proper vertical placement of each item.
There are also several side mounting strips which must be located as shown and denoted with
an asterisk
*
.
MOUNTING STYLE B - FLUSH (INSET) MOUNT
DETAIL OF SIDE
MOUNTING STRIP
Loading ...
Loading ...
Loading ...