Loading ...
Loading ...
Loading ...
- 9 -
Step 4
1. Lock one end of the long cable (82) to the bearing (61) of the main frame (4).
2. Route the other end of the long cable (82) in direction of arrow as showing in below drawing,
route the long cable (82) through the bottom right slot hole of front Plastic shroud (74a) while
route it through the Weight stack frame (1).
3. Install Weight selector pin (22) using the key ring end through the bolt of the long cable (82),
then lock the bolt tightly to the Selector rod (26).
4. Pre-lock Pulley cover (55), Alloy bush (20) and Pulley (21) to the Main frame (4) by using
Hexagon socket head screw (19), Flat washer (16) and Cap nut (56).
5. Pre-lock Pulley cover (55), Alloy bush (20) and Pulley (21) to the Main frame (4) by using
Hexagon socket head screw (54) and Flat washer (16).
6. Pre-lock Alloy bush (20) and Pulley (21) to the Weight stack frame (1) by using Hexagon socket
head screw (19), Flat washer (16) and Nylon nut (17).
7. Lock all the pre-locked screws tightly now.
Loading ...
Loading ...
Loading ...