Loading ...
Loading ...
Loading ...
Cleaning and maintenance en
45
Clean the base unit as follows:
1. Open the maintenance flap by the
handle.
2. Unlock the levers on the heat
exchanger cover.
3. Pull the heat exchanger cover out by
its grip.
4. Remove all of the fluff from the heat
exchanger cover and remove the
fluff filter.
Note: Ensure that no dirt remains on
the seals of the heat exchanger
cover.
5. Rinse the inside of the heat
exchanger cover and the fluff filter
thoroughly under running water and
dry them.
Notes
– You can use a soft brush to clean
off more stubborn dirt.
– Make sure you dry the fluff
collector's filter thoroughly after
rinsing it. If the fluff filter is damp,
this may increase the drying time
and affect the drying result.
6. Pull the fluff collector out horizontally.
Note: The fluff collector may contain
fluff and residual water, which may
drip out of it when you pull it out.
Loading ...
Loading ...
Loading ...