Loading ...
Loading ...
Loading ...
Overview of programmes en
25
0 Settings
Programme set-
ting
Function
Note: Not all settings can be activated in every programme. The activated settings are displayed on the but-
tons or highlighted brightly in the display. You can change or deactivate the activated settings by repeatedly
pressing on the relevant buttons on the display.
} Remote Start Pressing } Remote Start allows you to start the appliance remotely via the
Home Connect app or to call up the Home Connect settings.
Notes
■ Please observe the instructions for the ambient temperatures ~ Page 60.
■ Remote start can only be activated if the appliance door is closed and the appli-
ance is connected to your home network.
■ Remote start is deactivated for safety reasons in the following circumstances:
■ Open the door,
■ Power failure,
■ Press Start/ A Reload on the appliance,
■ Briefly press } Remote Start again,
■ Press # to switch off the appliance.
ü Drying
Target :
The dryness level defines how damp or dry the laundry is after the programme ends.
If you have set a dryness level, this is retained even after the appliance has been
switched off for the relevant programme. Exception: The settings are not saved for
Cottons.
Ò Cupboard Dry
Plus
Multi-layered, thick laundry that does not dry readily.
» Cupboard Dry Normal, single-layered laundry.
ö Iron Dry Normal, single-layered laundry that still needs to be damp after drying and is suitable
for ironing or hanging up.
Drying Level ô If you think the laundry is still too damp when the drying programme has ended, you
can adjust the degree of dryness to achieve a particular dryness level. To increase the
dryness level, set the degree of dryness to between 5 and 5 5 5. This extends
the programme duration but the temperature remains the same.
Once you have adjusted the degree of dryness for a dryness level, this setting is
retained even after the appliance is switched off.
MFinished inN Before starting the programme, you can delay the time at which the programme
ends by up to 24 hours using M and N.
The set time in hours, e.g. 8 h, is shown in the display and counts down until the pro-
gramme starts. Once the programme has started, the programme duration is dis-
played.
Note: Observe the information about the ambient temperatures ~ Page 60.
MFinished inN The drying time for \ timed programmes can be extended in 10-minute incre-
ments using M and N.
Loading ...
Loading ...
Loading ...