Loading ...
Loading ...
Loading ...
USE & CARE INSTRUCTIONS
Make sure that the electrical power is off before cleaning. The recommended detergent is a solution of water
and a neutral liquid soap. It is very important for the liquid soap to not contain granules that could scratch the
surface. First apply the solution to a soft cloth and then rub the cloth over the hood. It is important to follow the
direction of the metal grain with the cloth. Do not pour any liquid directly on the ventilation hood. The cloth
must have no buttons or fasteners that could scratch the surface. It is strictly forbidden to use chemical
solvents, aggressive, grainy or abrasive products, alcohol or similar products that could damage the surface of
the hood. The manufacturer will not be held responsible for functional or aesthetic damage caused by cleaning
products which are not suitable or using inadequate cleaning methods.
WARNING
4.1: Cleaning the Interior
Clean the interior of the hood with a cloth wetted in water and a neutral detergent or denatured alcohol as
needed. Do not clean the electrical parts or blower with liquids or solvents.
4.2: Cleaning the Exterior
Exterior Finish: Brushed Stainless Steel
Clean the exterior of brushed stainless steel hoods using a soft cloth and quality stainless steel cleaner or
warm soapy water. Follow all label instructions. Do not polish across the grain or in circles.
Exterior Finish: Paint with Gloss Finish
Clean the exterior of hood painted with a gloss finish using a soft cloth and quality glass cleaner or warm soapy
water. Follow all label instructions. Do not polish across the grain or in circles.
Exterior Finish: Designer Metal (Brushed Brass & Copper, Antique Brass & Copper, Pewter & Oil
Rubbed Bronze)
The following Designer Metals are treated with a protective clear coat that will prevent them from aging or
discoloring over time. This clear coat will last the life of the hood unless removed by the homeowner. Clean
with a microfiber cloth using Endust, Pledge or similar cleaner. Harsh cleaners such as Brite Boy will remove
the clear coat and the metals will start to age.
Exterior Finish: Designer Metal (Polished Brass and Polished Copper)
The following Designer Metals are not treated with a protective coating due to a “rainbow” effect it causes on
the metal. These finishes will patina over time without care and need occasional cleaning. Clean with a
microfiber cloth using Endust, Pledge or similar cleaner for regular cleaning. For tough blemishes Brite Boy
can be used with a microfiber cloth, but due to this product being slightly abrasive this should only be used in
select situations.
19