Loading ...
Loading ...
Loading ...
10
en Use
Fitting the vacuum pump
X Fig. B
■ Place the vacuum pump on the base
unit and lock into position.
Removing the vacuum pump
X Fig. C
■ Hold down both release buttons and
remove the vacuum pump from the base
unit.
Vacuum-sealing with containers
X Image sequence D
1. Add prepared or cooked food to the
appropriate container. Do not ll above
the max mark.
2. Make sure that lid gasket is inserted
correctly. Fit the lid and close securely
with the sealing clips. Set the date using
the two rings on the lid.
3. Place the base unit with the vacuum
pump on the container's vacuum seal
and hold securely.
4. Press Turbo button Â. The appliance
remains switched on as long as the
button is pressed.
5. The vacuum pump draws the air out
of the container. When the vacuum
indicator visibly dimples inwards, a
vacuum has been attained.
6. Release the button.
7. Remove the base unit with the vacuum
pump from the container. Disconnect the
mains plug.
Note: Store the vacuum-sealed container
with the lid facing up.
Vacuum-sealing with zipper bags
X Image sequence E
1. Add the food to the bag.
Note: Do not overll the bag. Make sure
the area of the vacuum seal is kept clean.
Special care is needed when vacuuming
juicy, moist or marinated food.
2. Place the bag on a at surface. Lightly
press the air out of the bag and close
the zip lock tightly along the entire
length.
Note: When vacuuming juicy, moist or
marinated food, hang the vacuum zipper
bag from the worktop. Make sure that
the vacuum seal rests on the surface.
X Fig. F
Important!
– The contents must not exceed the max
marking line.
– The area beyond the max line and both
sealing elements must be clean.
– If zip lock is not clean and completelly
closed, vacuum cannot be generated.
3. Place the base unit with the vacuum
pump of the bag's vacuum seal and hold
securely.
4. Press Turbo button Â. The appliance
remains switched on as long as the
button is pressed.
5. The vacuum pump draws the air out of
the bag. This makes the bag contract
and envelop the contents.
6. When the bag is suciently vacuumed,
release the button.
Note: Pay special attention if liquid is
excreting and approaching the max line.
Release the button before liquid crosses the
max line.
7. Remove the base unit with the vacuum
pump from the container. Disconnect the
mains plug.
Opening containers or zipper
bags
X Fig. G
■ To open a container, grip the vacuum
seal at one end and pull it up. Sucient
air has to get inside the container.
■ Open the sealing clips and remove the
lid.
X Fig. H
Loading ...
Loading ...
Loading ...