Loading ...
Loading ...
Loading ...
Cleaning and care
101
Rinsing the steam injection system
after the activation phase
At the end of the activation phase the
steam injection system will need to be
rinsed out to remove all traces of
descaling solution.
Cleaning is carried out by flushing
approx. 1litre of fresh tap water
through the system three times. The
water is collected in the universal tray.
Take the universal tray with the
collected descaling agent out of the
oven and empty it. Place the tray
back in the oven again on the top
shelf level.
Remove the plastic tube from the
container.
Remove the container, rinse it out
thoroughly and fill it with approx.
1litre of fresh tap water.
Place the container back in the oven,
insert the plastic tube, secure it to the
container and close the door.
Confirm with OK.
The intake process for the first rinse
will start.
Water will be flushed through the steam
injection system and will then collect in
the universal tray.
Messages will appear in the display to
prepare for the second rinse.
Take the universal tray out of the oven
and empty it. Place the tray back in
the oven again on the top shelf level.
Remove the plastic tube from the
container. Fill it with approx. 1litre of
fresh tap water.
Place the container back in the oven,
insert the plastic tube and secure it to
the container.
Confirm with OK.
Do the same for the third rinse.
Leave the universal tray (with the
water which has collected in it from
the third rinse) on the top oven shelf
while the evaporation process takes
place.
Loading ...
Loading ...
Loading ...