Loading ...
Loading ...
Loading ...
5
Universal cutter with Vario set (only size XL)
en
Note: The universal cutter should be
emptied before the cut food reaches the
lower edge of the Vario holder.
After using the appliance
■ Remove mains plug.
■ Press the release buttons and remove
the base unit from the attachment.
■ Turn attachment anti-clockwise and take
o the Vario lter insert.
■ Take hold of the blade by the plastic
handle and take out.
■ Remove Vario lter insert and Vario
holder.
■ Place the lid on the universal cutter to
keep in the processed ingredients.
Cleaning
Warning!
Never immerse the attachment of the
universal cutter in liquids and do not clean
under owing water or in the dishwasher.
Wipe the attachment with a damp cloth only.
Note: Universal cutter, blade,
Vario holder, Vario lter insert and lid are
dishwashersafe.
In Fig. G you will nd a summary of how to
clean the individual parts.
Whisk
X Fig. A
11 Gear attachment for whisk
12 Whisk
A whisk can be ordered from customer
service (order no. 657379).
Operation
The whisk is suitable for whipping cream,
beating egg whites and milk froth from hot
(max. 70 °C) and cold milk (max. 8 °C), as
well as for preparing sauces and desserts.
W Risk of scalding!
When processing hot milk, use a tall,
narrow receptacle for blending. Hot milk
may splash and scald you.
■ Peel the apple and slice. Arrange the
slices on the cake.
■ Preheat the oven to 180 °C and bake
the cake for 30 minutes.
Universal cutter with
Vario set (only size XL)
The universal cutter with Vario set is
suitable for cutting hard, dry food (e.g.
chocolate, nuts, almonds, Parmesan) or for
crushing ice cubes into small (S), medium
(M) or large (L) pieces. The size is specied
by positioning the marks S, M or L on the
Vario lter insert when inserting it into the
Vario holder.
Information and recommendations con-
cerning settings, quantities and processing
times can be found in the table (Fig. E).
X
Fig. D
■ Place the universal cutter on a smooth,
clean work surface and press.
■ Insert Vario holder into the universal
cutter. Pegs on the universal cutter must
be located in the grooves of the holder.
■ Place Vario lter insert on the universal
cutter. The marks S/M/L must be posi-
tioned above the peg of the universal
cutter according to the required degree
of cutting (Fig. D-2).
■ Insert Vario blade.
■ Add food.
Warning!
Vario blade must sit straight in the Vario
lter insert so that the attachment sits cor-
rectly (Fig. D-3a).
■ Place attachment on the Vario lter
insert and turn clockwise until it clicks
into position.
■ Place the base unit on the attachment
and lock into position.
■ Insert the mains plug.
■ Hold the base unit and universal cutter
rmly and switch on the appliance (turbo
speed).
■ Release the ON button after processing.
Loading ...
Loading ...
Loading ...