Loading ...
Loading ...
Loading ...
20
Using the auto shut-off
When the alarm goes off...
If either sensor senses water, the alarm sounds and the servo closes your shut-
off valve. The yellow and red indicators on the control box start ashing.
You will also receive a notication on your phone saying “Device has been trig-
gered. Automatic shut-off activated.”
Note: The pressure-release output pipe sensor activates the alarm after detecting water
leakage for 1 minute continuously.
To stop the audible alarm: Press the Alarm Off button. (The valve will still be
closed.)
Once you’ve xed the leak and dried off the sensor(s)...
Press and release the Test/Reset button on the control unit. The yellow light
ashes while the valve is being reopened. The green light comes on when the
servo has nished reopening the valve.
Customizing the alarm
By default, the audible alarm keeps sounding until you turn it off (or until the sensors no longer sense water). You can
also set the audible alarm to sound for 10 seconds only.
To change the audible alarm to 10 seconds only: Press and hold the Alarm Off button for 2-3 seconds. The yellow LED
ashes to show that you’ve changed the audible alarm to 10 seconds only. To change back, press and hold the Alarm
Off button again.
Loading ...
Loading ...
Loading ...