Beverage Cooler | 1
This Is
A Manual.
Beverage Cooler
BEFORE FIRST USE:
To prevent any internal damage, it is very important to
keep refrigeration units (like this one) upright throughout
their journey. Please leave it standing upright and outside
the box for 24 HOURS before plugging it in.
Beverage Cooler | 4
Important Safety Instructions
Follow these important safety instructions. If physical injury or damage is caused
by failure to follow these instructions, the warranty does not apply.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure,
clear of obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
• Do not store explosive substances, such as aerosol cans with ammable propellant,
in this appliance.
• Do not use extension cords or ungrounded (two-prong) adapters.
• This appliance is intended to be used in households and similar applications,
such as staff kitchen areas in shops, ofces and other working environments; hotels,
motels and other residential type environments; bed and breakfast type environments;
catering and similar non-retail applications.
• Do not pull the power cord when pulling the power plug of the beverage cooler.
Please rmly grasp the plug and pull it out from the socket directly.
Warnings related to electricity
• Do not damage the power cord under any condition.
• Please use a dedicated three-hole power socket, which is 15A or more and not
shared with other electrical appliances.
• Please ensure that the grounding electrode of the power socket is equipped with a
reliable grounding line.
• The beverage cooler uses an AC power supply of 115V/60 Hz.
• In case of leaking gas, turn off the leaking valve and open your doors and windows.
Do not unplug the cooler yourself, as it may cause a re. Contact customer support.
• For your safety, don’t place electric devices on top of the cooler, like microwaves or
electric kettles, and don’t store your beverage cooler inside pantries.
Warnings related to use
• Make sure the cooler is placed in a well-ventilated, indoor environment on at,
sturdy ground (rotate left or right to adjust the wheel to level if unstable).
• Be careful not to get ngers or dangling accessories caught in the cooler door.
• This cooler and its packaging are not intended to be played with or used by
children. If a child is using the cooler, it must be with adult supervision to avoid injury.
• Keep the cooler out of moist, damp, or humid environments and situations, so as
not to damage the electrical insulation.
• Do not use a base, cooler door, etc. as pedal or support.
• Do not place heavy objects on top of the cooler to prevent accidental damage or
injury.
• Do not use this cooler to store fresh foods, such as meats, vegetables, fruits, etc.
Beverage Cooler | 5
This product can only be used to chill beverages.
Warnings related to placing items
• Do not put ammable, explosive, volatile, or highly corrosive items in the cooler to
prevent damages to the product or re accidents.
• Do not place ammable items near the cooler to avoid a re hazard.
• This product is for household refrigeration appliances, mainly used for the storage of
beverages. It’s not used for other purposes, such as storage of blood, drugs, and biological
products.
• Do not cover or close ventilation and exhaust holes.
SAVE THESE INSTRUCTIONS
For Household Use Only
Important Safety Instructions
Beverage Cooler | 6
Parts List
Fan
Shelf
Shelf
Glass Door
Adjustable Foot
Temperature Control
PLACEMENT
• Before using the cooler, remove all packaging materials, including bottom
cushions, foam pads, and tape inside the cooler. Tear off the protective lm on
the door and the cooler body.
• Make sure the cooler is placed in a well-ventilated, indoor environment on at,
sturdy ground (rotate left or right to adjust the wheel to level if unstable).
• Please operate this beverage cooler in a room of 133 cubit feet (or larger) for
safety concern.
• Avoid putting the cooler in direct sunlight or too close to a heat source. Keep
a safe distance of at least 12 inches between the cooler and a stove or furnace if it
can’t be avoided. We also advise applying an insulation board in that case.
• Keep a circulation space of at least 2 inches on both sides of the cooler to
preserve power.
Beverage Cooler | 7
Operating Instructions
PROPER USE OF BEVERAGE COOLER
Energy Conservation
• The cooler should be placed in a room that is dry and ventilated. The cooler
cannot be placed under direct sunlight or next to a heat source (such as
a radiator, stove, etc.), and a suitable insulation board must be applied if
necessary.
• Try to shorten the opening time of cooler’s door.
• Avoid putting warm beverages in the cooler.
Installation
• Keep in upright position for 24 hours before initial power up.
• While the cooler is empty, set the Temperature Control to maximum and leave
for 1 hour.
• When you start putting beverages inside the cooler, maintain a 2-inch gap
between the interior wall of the cooler and the beverages to keep the proper
airow.
• Follow steps below if you want to change the door orientation from left-hinge
to right-hinge:
1. Use a screwdriver to remove upper and lower left hinge (triangle with 3 screws).
2. Transfer the hinge to the right of the cooler and attach to the right side of the door.
INTRODUCTION TO THE BEVERAGE COOLER’S FUNCTIONS
-Display Controls
Whenturningonforthersttime,thedisplayscreenwillbeafulldisplayfor3
seconds and the startup tone will ring.
-Standby Mode
To activate standby mode, hold the standby button for 3 seconds. You will hear a
beep and the display area will be cut off. To deactivate standby mode, press the
button again. You will hear a beep and the standard display will show.
-Lighting
Press the lighting button to turn the light on or off.
-Temperature Seing
Press the increase temperature button to increase the temperature one degree at
Beverage Cooler | 8
Operating Instructions
a time. Press the decrease temperature button to decrease the temperature one
degree at a time. To change display from OF to OC, press and hold the increase and
decrease button simultaneously for 5 seconds.
-Memory Function
If turned off, this cooler will remember any settings in place and will work according
to those settings once it’s turned on again.
-Fault Indicators
If any of these indicators are displayed, it means the cooler has the following issues.
Troubleshooting
Cooler isn’t cool
Cooler is not refrigerating
LED light is off
Condensation on the
glass door
The door is being opened too often. Or the cooler is
too full of bottles or cans. Reduce the frequency of
opening the door and give it 4-5 hours.
The power is out or the cooler isn’t plugged in.
Make sure that the cooler is plugged in.
The LED light is broken. Contact customer support.
The temperature is set too low or too high.
Increase the temperature and use a rag to wipe
away any drops of water.
Possible Causes & Solutions
Problem
Beverage Cooler | 9
Disconnecting the beverage cooler
Unplug the power plug from the socket to disconnect the cooler.
Cleaning your beverage cooler
Dusting behind the cooler and on the ground will improve the cooling effect and
save energy. The interior of the cooler should be cleaned to avoid any odor. Follow
the cleaning procedure below:
1. Unplug the cooler.
2. Wipe the door seal with warm water.
3. Use soap and warm water to clean the cooler.
4. Reconnect the cooler when the cooler is clean and dry.
Note: Do not use hard brushes, wire brushes, abrasives, organic solvents, boiling
water, acid, or alkaline items as this may damage the cooler surface and interior.
FREQUENTLY ASKED QUESTIONS
I’m hearing some sounds, what’s up with that? Buzzing or any gurgling sound is
normal,asthatcanbearesultoftheunitworkingproperlyorrefrigeratinguid
owingthroughthepipeline.
Cleaning & Maintenance
Beverage Cooler | 10
This manual is to be used with all items with the model numbers
RATING: 115 V, 60 Hz, 75 WATTS, AC ONLY
Keep all plastic bags away from children.
Warranty Information
Vremi offers a 12-month warranty on all of our products purchased new and unused from
Vremi LLC or an authorized reseller, with an original proof of purchase and where a defect has
arisen, wholly or substantially, as a result of faulty manufacturing, parts or workmanship during
the Warranty Period. The warranty does not apply where damage is caused by other factors,
including but without limitation: (a) normal wear and tear; (b) abuse, mishandling, accident or
failure to follow operating instructions; (c) exposure to liquid or inltration of foreign particles;
(d) servicing or modication of the product other than by Vremi. These are our general terms
for the warranty service, but we always urge our customers to reach out to us with any issue,
regardless of warranty terms. If you experience an issue with a Vremi product, please contact
us at support@vremi.com, and we will do our best to resolve it for you.
vremi.com/chat
CHAT WITH US
(646) - 490 - 9904
CALL US
EMAIL US
Drop Us A Line
VRM010686N
Warning
Beverage Cooler | 12
vremi.com
