Loading ...
Loading ...
Loading ...
49
Useful
Features
Setting up the Projector Network Environment (“Network” menu)
If you do not want others to change the setting
for the “Network” menu, set a password.
Select “Password”, then press
ENTER or Q.
• The screen for entering the password
appears.
1
11
11
1
Setting a Password
Press P or R to set the first digit
in “New Password”, then press Q.
2
Enter the remaining 3 digits, then
press ENTER.
•To return to the previous digit, press O.
3
Enter the same password in “Re-
confirm”, then press ENTER.
• The status for “Password” changes to
“Enable”.
4
Note
• Once after the password is set, you must en-
ter the password to change the “Network”
menu settings.
Select “Password”, then press
ENTER or Q.
• The screen for entering the password
appears.
1
Enter the password in “Old Pass-
word” using P, R, Q and O, then
press ENTER.
Enter the password in “New Pass-
word” using P, R, Q and O, then
press ENTER.
Enter the same password again in
“Reconfirm” using P, R, Q and O,
then press ENTER.
Note
• If you do not need the password protection
for the “Network” menu settings anymore,
press ENTER without entering new password
in steps 3 and 4.
•To cancel the password settings, press
RETURN.
If you forget the password
If you forget the password, perform the fol-
lowing procedure to delete it, then set a new
password.
On the projector, press
S
→
T
→
S
→
T
→
S
→
T
→
U.
Note
• If ENTER is held down for more than 5 sec-
onds, the operation buttons on the projec-
tor will be locked. (See page 48.)
•You cannot use the buttons on the remote
control to delete the password.
2
3
4
a Setting a Password
a Changing the Password
Menu operation n Page 39
SEL./ADJ. ENTER END
Pict. SCR PRJ Network Help
Password Disable
DHCP Client Off
TCP/IP
MAC Address
Projector
XX : XX : XX : XX : XX : XX
XX-XXXX
4
2
3
1
Setting the Password
Old Password
New Password
Reconfirm
–
––––
–––
––––
Network
Loading ...
Loading ...
Loading ...