Loading ...
Loading ...
Loading ...
08
THERMOSTAT INSTALLATION
1. Fasten the mounting back
plate and mounting plate to
the mounting box and tighten
the screws
2. After fastening and installing
the back plate and the mounting
plate, snap into the display part
3. The installation
is complete
07
STEP1
Power off your Heating , Ventilation , and Air Conditioning(HVAC) system by using
the master switch or circuit breaker box. This is important for your safety.
STEP2
Confirm your system is off by turning on your heat(during winter)or your AC(during
summer).Wait a few minutes-you should not feel air coming from your vents.
STEP3
Remove your old thermostat cover from the wall.
1.Look for your master switch or circuit breaker box in the basement,attic,utility
close,or behind a wall panel near the thermostat.
2.If you have a boiler,check to see that the main flame is extinguished.
3.Many thermostat simply pop off or unclip from the base,while others may have
screws that you will need to remove.
TIPS:
Two ways to install thermostat
1
2
Tighten the screws and
snap into the display part.
Loading ...
Loading ...
Loading ...