Loading ...
Loading ...
OPERATION
Safety
www.stiebel-eltron-usa.com CK 150-1 / 200-2 Trend | 3
ENGLISH
1.2.3 Keywords
KEYWORD Meaning
DANGER Failure to observe this information will result in serious
injury or death.
WARNING Failure to observe this information may result in serious
injury or death.
CAUTION Failure to observe this information may result in non-seri-
ous or minor injury.
1.3 Other symbols in this documentation
Note
Notes are bordered by horizontal lines above and below
the text. General information is identified by the adjacent
symbol.
f Read these texts carefully.
Symbol Meaning
Material losses
(appliance damage, consequential losses and environmen-
tal pollution)
Appliance disposal
Never cover the appliance
f This symbol indicates that you have to do something. The ac-
tion you need to take is described step by step.
2. Safety
Observe the following safety information and regulations.
Operate the appliance only when fully installed and with all safety
equipment fitted.
2.1 Intended use
This appliance is designed to heat indoor living areas.
Any other use beyond that described shall be deemed inappropri-
ate. Observation of these instructions and of instructions for any
accessories used is also part of the correct use of this appliance.
2.2 Safety information
Operate the appliance only when fully installed and with all safety
equipment fitted.
The heater must be properly installed before it is used.
DANGER: Electrocution
Before cleaning, make sure the power has been turned
off at the circuit breaker panel and that the heating
element of the heater is cool.
WARNING: Burns
Never operate this appliance ...
- if the minimum clearances to adjacent
object surfaces are not maintained, for ex-
ample to furniture, net curtains, curtains,
textiles or other flammable materials (See
14.2, “Minimum clearances to hard surfac-
es”, pg. 8).
- in rooms where the appliance is at risk from
fire or explosion as a result of chemicals,
dust, gases or vapors.
- in the direct proximity of pipes or contain-
ers that carry or contain flammable or ex-
plosive materials.
- if work such as laying cables, grinding or
sealing is carried out in the installation
room.
- if sprays, floor polish or similar products
containing gasoline are used. Vent the room
sufficiently before heating.
- if an appliance component is damaged, the
appliance has fallen over or already had a
fault.
- outdoors.
WARNING: Fire
Never place any flammable, combustible or insulating
objects or materials, such as laundry, blankets, maga-
zines, containers with floor polish or gasoline, spray
cans or similar on the appliance or in direct proximity
to it.
WARNING: Fire
Ensure that no foreign bodies enter the air inlet and
outlet. This could result in electric shock or fire or in
damage to the appliance.
WARNING: Fire
To prevent fires ensure that the air inlet and outlet are
never blocked. Never position the appliance on soft
surfaces, such as a bed, as this could result in the ap-
ertures becoming blocked.
WARNING: Burns
The casing surfaces of the appliance and the expelled
air become hot during use (above 194°F (90°C)). To pre-
vent burns ensure that the hot surfaces never come
into contact with bare skin.
2.3 General information
!
MATERIAL LOSSES:
Never cover the appliance.
Never step on the appliance.
2.4 Test symbols
See type plate on the appliance.
!
Loading ...
Loading ...
Loading ...