Loading ...
Loading ...
Loading ...
Connect to the TV
5
English
User Manual
Your Philips Digital TV will allow you to enjoy digital programs
directly from your cable or off air.
Connect directly to the TV or connect via your current cable
box or Satellite Receiver box.
• Directly to the TV (you will not be able to receive pay
channels)
1. Connect the cable TV signal or the incoming antenna signal
to the
CABLE/ANTENNA 75 Ω x jack at the bottom of
the TV.
2. See page 15 for details on using Autoprogram to store
channels in the TV’s memory.
• Via a cable box or Satellite box
1. Maintain the connection of the TV cable of your home into
your cable box (or satellite receiver box).
2. Connect your Cable box (or satellite receiver box) to the
back of the TV using the best connection options. See to
make audio and video connections, p. 41.
3. Select the source using the
AV button on the remote
control.
4. Press the
OK button to confirm your selection.
For more information, please refer to your cable box (or
satellite receiver box) manual.
Notes:
- Broadcasters are in the middle of a transition from analog to
digital TV.This means that a given broadcaster will have two
channels on the air, one analog and one digital.
- This connection will supply stereo sound to the TV if it is
being broadcast by the station you are watching.
ANTENNA
75
o
CABLE
LPrH
RPbV
DIGITAL
AUDIO
IN
Y
Pb
Y
S-VIDEO
S-VIDEO
AV 2
AV3
AV1
VIDEO
L
R
Cable box / SAT
VIDEO
AV2 :
L + R + VIDEO
ANTENNA
75
o
CABLE
OUTIN
SIGNAL
SPLITTER
2
3
1
44
Note:Watching Cable TV programs that don’t require
the cable box
Since you’ve connected the cable TV signal directly to the TV’s
tuner, you can also watch the unscrambled programs by simply
tuning to the desired channel.You must first use Autoprogram,
however, to store channels in the TV’s memory. See page 15.
This connection will supply stereo sound to the TV if it is
being broadcast by the station you are watching.
Loading ...
Loading ...
Loading ...