Loading ...
Loading ...
Loading ...
40
o Place the end of the drain hose on your drain pipe. Push it a
short way down into your drain pipe. The drain pipe must have a
minimum diameter of 40 mm.
o The top of the drain hose must be no higher than 1000 mm.
o IMPORTANT: Do not insert the drain hose too deeply into the
pipe, as this may cause siphoning.
o NEVER EXTEND THE DRAINAGE HOSE FROM ITS ORIGINAL
LENGTH.
Connecting to the power supply
o IMPORTANT: The electrical socket must still be accessible
once the appliance is installed.
o Consult the rating plate, located on the right hand side of the
drop down door BEFORE making the electrical connections.
Ensure that the voltage reaching the plug is the same as that on
the rating plate.
o DO NOT REMOVE THE RATING PLATE AS THE
INFORMATION ON IT IS IMPORTANT.
o The moulded plug that is supplied with the appliance must be
placed into an earthed and insulated socket.
o Broken or damaged power leads must only be replaced by a
suitably qualified person. A power lead of a similar type must be
used in replacement.
o Power lead type – H 0 V V – F 3G 1,5.
o IMPORTANT: We do not recommend that this appliance is
connected to an extension lead.
Loading ...
Loading ...
Loading ...