Loading ...
Loading ...
Loading ...
Control panel
1) ON/OFF button
2) Delay start button
3) Power on indicator
4) Delay start indicators
5) Salt and rinse aid indicators
6) Program indicators
7) Program button
Using your dishwasher
Before first use
o Install the appliance as per the installation instructions contained
within this booklet.
o Fill the water softener with 1 litre of tap water and then fill with
specialist dishwasher salt. After this you should set the water
softener level.
o Fill the rinse aid dispenser and then set the rinse aid dosage.
Filling with dishwasher salt
IMPORTANT: You should only use salt that is specially
designed for use in a dishwasher. If any other type of
salt is used in the appliance (in particular table salt),
it will damage the water softener.
o Ideally you should fill the water softener with salt, just before
you are about to run a wash program. This will help to clear any
salt that may have overflowed from the water softener during
the salt filling process.
o Open the door of the dishwasher and then remove the lower
basket. The basket should be empty when you remove it.
o Turn the water softener cap anticlockwise and remove it.
o Pour 1 litre of water into the water softener.
11
Loading ...
Loading ...
Loading ...