User Manual Pro-Ject TUBEBOXDS2SILWAL Sumiko Tube Box DS2 Silver/Walnut Tube Phono-Preamplifier

Documents for Pro-Ject TUBEBOXDS2SILWAL

The following documents are available:
User Manual

User Manual - (English) Read Online | Download pdf

Other Documents

Product Information - (English) Download

Photos

Photos: View Photos

User Manual

For TUBEBOXDS2SILWAL.

INSTRUCTIONS FOR USE

Pro-Ject Tube Box DS2

Loading ...

Summary of Contents for Pro-Ject TUBEBOXDS2SILWAL:

Warning of a hazard for the user, the unit or possible misuse2
Important notice2
Connectors2
Do not connect the phono amplifiers output to a phono input (sometimes labelled gram, disc or RIAA) on the amplifier.2
Connecting one or two record players2
Connection to the amplifier2
Mains power connection3
- Remote power on - triggers3
Controls3
To switch on from standby or to standby3
Settings3
Input and Output3
Tube Box DS2 has two separate inputs IN1, IN2 and outputs OUT1, OUT2. The button Input selects between inputs and the button Output switches between outputs.3
Subsonic3
Turn on and off subsonic filter. Any change will be automatically stored for the chosen input, when input is changed or the unit is switched into standby mode.3
Adapt to connected phono cartridge3
The rotary control and the 3 control buttons on the right side of the front panel are used to set gain, input impedance, input capacitance. You will find all details about construction principle and technical data in the manual of the phono cartridge....3
Gain dB4
Gain for the outputs can be set between 40dB, 45dB, 50dB, 60dB and 65dB in steps of 5dB or 10dB. Any change will be automatically stored for the chosen input, when input is changed or the unit is switched into standby mode.4
Input impedance, variable â low-output MC cartridges4
The button Loading Î© must be set to Variable. Use the rotary controller to set input impedance to desired value (10Î©-1000Î©)4
* Input capacitance is irrelevant for low-output MC cartridges4
Input impedance, 47k - high-output MC and MM cartridges4
Input capacitance, variable â high-output MC and MM cartridges4
The rotary control must be set to 10 Î©. Press Loading Î© until the LED marked by 47k lights up. The device has a basic capacity of 47pF, and the Load pF button can be used to increase the terminating capacity by 100pF, 220pF or 320pF depending on the L...4
Examples of typical settings4
Technical specifications Pro-Ject Tube Box DS25
Potential incorrect use and fault conditions6
Service6
Warranty6
Copyright, trademarks6

File type: PDF

File name: 14498441_tubeboxds2silwal.pdf

File size: 247.54 KB

File Language: English

Pages: 6

Author: Pro-Ject

File created: 2017-02-14

Published: 2021-05-18

Updated: 2023-07-13

Download File

User Manual Pro-Ject TUBEBOXDS2SILWAL Sumiko Tube Box DS2 Silver/Walnut Tube Phono-Preamplifier

Documents for Pro-Ject TUBEBOXDS2SILWAL

User Manual

Specifications

Photos