Loading ...
Loading ...
Loading ...
9
Charger Operation
m
WARNING! Charge only iONMAX iBAT40 lithium-ion
battery packs in compatible iONMAX iCHRG40 lithium-ion
battery chargers Other types of batteries may cause personal
injury and damage.
To reduce the risk of electric shock, do not allow water to ow
into the charger's AC/DC plug.
When to Charge the iONMAX iBAT40
Lithium-Ion Battery
NOTE: The iONMAX iBAT40 lithium-ion battery packs do
not develop a "memory" when charged after only a partial
discharge. Therefore, it is not necessary to run down the
battery pack before placing it into the charger.
• Use the battery charge indicator lights to determine when to
charge your iONMAX iBAT40 lithium-ion battery pack.
• You can "top-o" your battery pack's charge before starting
a big job or after a long day of use.
Charging the Battery
1. Pull the push lock button on the battery to pull the battery
pack up and out of the equipment (Fig. 1).
2. Depending on your Snow Joe
®
+ Sun Joe
®
charger model,
how to recharge your lithium-ion battery will vary.
3. Check that the mains voltage is the same as that marked
on the rating plate of the charger. Then, insert the
charger's plug into the electrical wall outlet. When you
plug in the charger, the top green light will illuminate and
stay green (Fig. 2).
4. Place the battery pack into the charger by sliding the
pack as shown to lock it into position. When you insert
the battery into the charger, the bottom red light will
illuminate to indicate that the battery is charging
(Fig. 3 – 4).
In order to operate this cordless snow shovel you will need
a 40V iONMAX System battery and charger. See page 14
for battery and charger options and specications, or for
more information visit snowjoe.com.
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
Fig. 1
Push lock
button
Fig. 2
green
Power on
green
Power on
iCHRG40
iCHRG40-DPC
Fig. 3
green
green
Fully charged
green
red
Charging
iCHRG40
Loading ...
Loading ...
Loading ...