Loading ...
Loading ...
Loading ...
Cleaning and care
39
NoSmell active charcoal filters
If the rangehood is connected for
recirculation, two charcoal filters must
be inserted in addition to the grease
filter. These are designed to absorb
cooking odours.
The charcoal filters are fitted in the
canopy above the grease filter.
Charcoal filters are available to order via
the Miele online shop (see the end of
this booklet for contact details) or
directly from Miele. The part number of
the charcoal filters required is listed
under “Technical data”.
Fitting and replacing the charcoal
filters
Before fitting or replacing the
charcoal filters, the grease filter must
first be taken out (see previous
section for instructions on how to do
this).
Unwrap the charcoal filters.
Press the charcoal filters into the
frame.
Refit the grease filter.
When to change the NoSmell active
charcoal filters
Replace the charcoal filters when
they no longer absorb kitchen odours
effectively.
They should be replaced at least
every 6 months.
The operating hours counter will remind
you to replace the charcoal filters by
lighting up the charcoal filter symbol .
Resetting the charcoal filter
operating hours counter
After changing the charcoal filters, the
operating hours counter needs to be re-
set.
To do this, with the fan switched on,
press the operating hours control
twice, then press it again and
hold it for approx. 3 seconds until
only 1 is flashing.
The charcoal filter symbol goes out.
If you want to replace the charcoal
filters before the operating hours
counter has reached its maximum:
Press the operating hours control
twice and hold it for approx. 6
seconds until only 1 is flashing.
Disposing of the charcoal filters
Used charcoal filters can be disposed
of with the normal household waste.
Loading ...
Loading ...
Loading ...