Loading ...
Loading ...
Loading ...
3130
SPECIFICATIONS
Voltage
Power Consumption
Maximum Use
Weight
Dimension
Manufacturer
Type
Origin
Product
Model
Juicer
AC220-240V, 50/60Hz
240W
Less than 30 min
NUC Electronics Co., Ltd.
Low speed compression
Made in Korea
NS-1226CBC2, NS-1226CEC, NS-1226
7.1kg
201 x 239 x 490 (mm)
During juicing, the juicer stopped:
· Check the power cord and make sure it is
plugged in correctly.
· Check that all the parts are correctly assembled.
· If too many ingredients are inserted at one time,
this can cause the juicer to stop.
· When the juicer stops because there are too
many ingredients inserted in it, press the
REVERSE - OFF - FORWARD button in this order,
switching back and forth 2 to 3 times.
· The reverse setting will push the ingredients up,
and the forward setting will pull the ingredients
down.
· After using more than 30 minutes, if the juicer
stops due to the overload protection, let the
juicer cool for 30 minutes to 1 hours before
juicing again.
· If there are hard seeds within the ingredients,
remove them before juicing. Hard seeds can
damage the juicer.
Layers of separation in the juice:
·
Depending on the density of the ingredients, the
extracted juice may show layers of dierent juices.
It is dierent from separation due to oxidation
caused by juicing with a high-speed juicer.
The drum lid is stuck:
· After juicing, let the juicer operate for another
30 seconds to extract the remaining pulp.
·
If there is too much pulp in the top-set, this can cause
the drum lid to not open. In this situation, press
the REVERSE-OFF-FORWARD button in the order,
switching back and forth 2 to 3 times. Then place both
hands on the drum lid and firmly press down while
simultaneously turning the drum lid to open.
· Pour water down the feeding tube to rinse out
the insides and then try opening the drum lid.
Juice dripping down the body:
·
If the silicone ring on the bottom of
the juicing bowl is not plugged in correctly,
the juice may seep out on to the juicer body.
Before assembling the parts, check and make sure
the silicone ring is plugged in correctly.
Is it possible to juice ingredients with
tough ber?
· Ingredients like celery or ginger contain long
bers that may wrap around the juicing screw
and aect the juicer’s performance. When
juicing brous ingredients, do not collect more
than 1 lb. of juice. After collecting this quantity
or less, clean the top-set completely before
juicing again.
Discoloration of the plastic parts:
· After juicing, if the juicer is not cleaned right
away, the remaining pulp inside the top-set
can dry up which can make disassembling and
cleaning hard. This can also aect the juicer’s
performance and color.
· Ingredients that are rich in carotenoids such
as carrots and spinach may dye plastic parts.
When the parts are dyed with carotenoids, rub
vegetable oil in to the dyed areas and use mild
detergent to clean.
· Vegetable oil should only be used during
clean-up for parts that are discolored. Do not
use vegetable oil on the juicing screw or the
strainer. If vegetable oil or oil from animal fat
gets on the juicing screw or the strainer, this
can aect the juicer’s performance and may
result in damaged parts.
· The silicone pieces on the top-set can be
detached to be thoroughly cleaned.
Using for purposes other than juicing:
· This juicer is designed to juice ingredients like
fruits and vegetables.
· Do not use the juicer for extracting vegetable oil.
· Do not juice ingredients with high contents of
vegetable/ animal oil.
· If vegetable/animal oil gets on the juicing screw
or the strainer, this can aect the performance
of the juicer and could result in damaged parts.
TROUBLESHOOTING Q&A
Loading ...
Loading ...