Loading ...
Loading ...
Loading ...
2928
OPTIONAL
|
HOW TO USE LID OPENER
Use the lid opener when the lid doesn't open gently after juicing.
Grab the feeding tube and turn the lid opener counterclockwise.
1
2
Be sure that the top set is on the main body, then use lid opener.
Place the lid opener by connecting the hooks as shown in the illustration.
1
1
1
CAUTIONCAUTION
TROUBLESHOOTING Q&A
When there is no power to the juicer:
· Check if the power cord is properly plugged in.
· Check if the drum lid and the juicing bowl are
properly assembled.
· Check if the top-set and the body are properly
assembled.
· Juicer will not operate if parts are not
assembled properly.
Low juice yield:
· Dierent ingredients hold dierent amounts of
uid that will yield dierent amounts of juice.
· If the ingredients are not fresh, they may
contain reduced amount of uid, which will
yield less juice. Sock ingredients in cold water
for about 30 min prior to juicing for the best
result.
· If the ingredient itself has low water content,
it may help to soak it in water before juicing.
· If juicing ingredients with small seeds, after a
few servings, it may reduce the juice yield.
For best result, disassemble and wash the top-
set in between juicing.
· If there is seed residue on the bottom of the
strainer, this can aect juicer performance and
the overall juice yield.
There is too much pulp in the juice:
· To reduce the ne pulp, clean the top-set
frequently and extract the pulp.
· Use a mesh strainer and put the juice through
it to collect the unwanted pulp.
· If the strainer and the screw are damaged
and aecting the juicer’s performance, it is
recommended the parts be replaced.
*The lifetime of each part may vary depending
on length and method of use and ingredients
extracted.
The drum lid will not close:
· Make sure the juicing screw is pushed all the
way in to the strainer in order for the drum lid
to close properly.
· If the juicing screw is not properly in position,
the drum lid may not close.
Odd noise from the juicer:
· Check if the parts are assembled correctly.
Try reassembling the parts and listen for the
odd noise.
· Do not start the juicer unless there are
ingredients and/or liquid in it.
· Operating the juicer without ingredients can
cause damage to the screw.
· If the juicer is operated without ingredients or
liquid, the noise level can increase and also can
lead to damage.
· The friction noise from the juicing screw and
the strainer will disappear when ingredients
are inserted into the juicer.
· If the noise occurs when ingredients are
inserted into the juicer, check the size of the
ingredients. Do not insert anything over 1 inch
in thickness.
· Depending on the type of ingredients,
the dimensions can be smaller.
· The noise can occur if the juicer is operated on
an uneven or slanted surface. Place the juicer
on a horizontally at surface when operating.
The extracted pulp is very moist:
· During the very beginning of extraction,
the pulp can be more moist.
· Depending on the ingredient’s condition,
the extracted pulp can be aected; especially
when the ingredient is not fresh, the juice can
be extracted with the pulp.
During operation, the juicing bowl shakes.
· The juicing screw and the strainer are set up to
crush and squeeze the ingredients. It is normal
for the juicing screw and the strainer to vibrate.
· If the ingredient contains strong ber,
the vibration from the top-set may be stronger.
Loading ...
Loading ...
Loading ...