Loading ...
Loading ...
Loading ...
en Troubleshooting
50
Fault Cause troubleshooting
Remnants of food on table-
ware.
Filters are soiled.
▶
Clean the filters.
→"Cleaning filters", Page42
Filters are inserted incorrectly
and/or not engaged.
1. Insert the filters properly.
→"Filter system", Page42
2. Engage the filters.
Washing programme selected
too weak.
▶
Select a more intensive washing pro-
gramme.
▶
Adjust the sensitivity of the sensors.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
▶
Only remove large remnants of food
and do not prerinse tableware.
▶
Adjust the sensitivity of the sensors.
Tall narrow receptacles in
corner areas are not rinsed
adequately.
▶
Do not position tall narrow recept-
acles at too great an angle or in
corner areas.
Top baskets on right and left
are not set to same height.
▶
Set the top baskets on the left and
right to the same level.
→"Top basket", Page22
Detergent residue in the appli-
ance
Lid of the detergent dispenser
is blocked by items of table-
ware parts and will not open.
1. Arrange tableware in the top basket
tableware so the tab collecting tray is
not obstructed by tableware.
→"Arrange tableware", Page35
Items of tableware are blocking the
dispenser lid.
2. Do not place tableware or fragrance
dispensers in the tablet collecting
tray.
The lid of the detergent dis-
penser is blocked by the tab
and will not open.
▶
Position the tab in the detergent dis-
penser crosswise, not vertically.
Tabs are used in the quick or
short programme. Dissolving
time of the tab is not attained.
▶
Select a more intensive Programme
or use Powder detergent →Page32.
Washing effect and dissolving
performance are reduced
after a prolonged storage time
or detergent is very lumpy.
▶
Change your detergent →Page32.
Loading ...
Loading ...
Loading ...