Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
Before You Start...
1.Read this manual carefully and completely.
2.The range hoods confirms to related appliance standards. Please check your local building codes for any
additional requirements.
3.The appliance has been manufactured as class I, therefore ground connection is necessary. The range hood
must be installed so that that the plug is easily accessible.
Unpacking
Remove the packaging with the product in place. Cut off the packing ribbons and carefully cut open the
packaging (do not cut too deeply), remove the packaging. Check that the product is free from transport
damage. Any damage shall be reported immediately to the carrier or seller. Damage, faults and missing
parts must be reported immediately to the seller
Installation preparation
1.Before mounting the hood, plug in and test all functions for proper operation.
2.Remove the filters from the bottom of the hood to prevent damage during the installation.
3.Connect duct tube (if included with the range hood) to the top of the range hood using duct tape on all seals.
3.Your range hood will need to be ducted to ensure it operates and complies with local and national
regulations.
DUCT MOUNTING OPTIONS
You will need some additional parts to complete these installations.
All motors need to be ducted individually and the included expanding duct is 150mm diameter.
The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or
other fuels.
REAR TOP (ROOF) TOP (SOFFIT/EAVE)
(RECOMMENDED)
RANGEHOOD INSTALLATION
Loading ...
Loading ...
Loading ...