Loading ...
Loading ...
Loading ...
TEMP.
When you select a washing programme, the
appliance automatically proposes a default
temperature.
The indicator Cold = cold water.
The indicator of the set temperature comes on.
SPIN
When you set a programme, the appliance
automatically sets the maximum spin speed allowed
except programme Denim.
Additional spin options:
• No Spin . The related indicator comes on.
Set this option to deactivate all spin phases. The
appliance performs only the draining phase of
the selected washing programme. Set this
option for very delicate fabrics. The rinse phase
uses more water for some washing programmes
• Rinse Hold . The related indicator comes
on.
The final spin is not performed. The water of the
last rinse is not drained out to prevent the
fabrics from creasing. The washing programme
ends with water in the drum.
The door stays locked and the drum turns
regularly to reduce creasing. You must drain the
water to unlock the door.
If you touch the Start/Pause button, the
appliance performs the spinning phase and
drains the water.
• Night . The related indicator comes on.
The intermediate and the final spinning phases
are suppressed and the programme ends with
water in the drum. This helps to reduce
creasing. The door stays locked. The drum turns
regularly to reduce creasing. You must drain the
water to unlock the door.
As the programme is very quiet, it is suitable for
use at night time when cheaper electricity tariffs
are available. In some programmes the rinses
are performed with more water.
If you touch the Start/Pause button, the
appliance performs only the draining phase.
The appliance empties the water out
automatically after approximately 18
hours.
PREWASH
With this option you can add a prewash phase to a
washing programme.
The relevant indicator illuminates.
• Use this option to add a pre-wash phase at
30 °C before the washing phase.
This option is recommended for heavily soiled
laundry, especially if containing sand, dust, mud
and other solid particles.
These options can increase the
programme duration.
PERMANENT EXTRA RINSE
With this option you can add a few rinses
according to the selected washing programme.
Use this option for people with allergies to
detergent residues and with sensitive skin.
This option increases the programme
duration.
The corresponding indicator above the touch
button illuminates and also stays permanently on
during next cycles until this option is deactivated.
EASY IRON
The appliance carefully washes and spins the
laundry to prevent the creases.
The appliance decreases the spin speed, uses
more water and adapts the programme duration to
the type of laundry.
The related indicator comes on.
DELAY START
With this option you can delay the start of a
programme to a more convenient time.
Touch the button repeatedly to set the required
delay. The time increases in steps of 1 hour up to
20 hours.
The display shows the indicator
and the
selected delay time. After touching the Start/Pause
button, the appliance begins the countdown
and the door is locked.
FLEXITIME
With this option you can reduce the programme
duration depending on the load size and the degree
of soiling. This adjustment should be made after the
setting of Temp. and Spin .
When you set a washing programme, the display
shows the default duration and dashes.
Touch FlexiTime
button to reduce the
programme duration according to your needs. The
display shows the new programme duration and a
number of dashes will decrease accordingly:
12
Loading ...
Loading ...
Loading ...