Loading ...
Loading ...
Loading ...
Fault, what to do? en
39
Door does not open
automatically at the end of
the Eco 50° programme.
The child-proof lock is activated. Deactivate the child lock (see chapter
“Operating the appliance”).
Eco drying deactivated. Activate Eco drying (see chapter “Operating
the appliance”).
Eco 50° programme not
selected.
Select Eco 50° programme.
Additional function selected. Deselect additional function.
Intensive drying switched on. Switch off intensive drying.
Door is not set correctly. Set the door correctly with the aid of the
installation instructions so that the door gap
is min. 70 mm - 100 mm.
Wrong screws used to adjust the
door gap. If excessively long
screws are screwed in, they may
deactivate Eco drying.
To adjust the door gap, use screws which
have a max. size of ø 4X30 (included in the
product package, see installation
instructions).
Safety device switches the Eco
drying function off. A technical
fault has probably occurred.
Call the after-sales service.
Door does not open. The child-proof lock is activated. Press twice in quick succession on the door
in the middle.
Deactivate the childproof lock (see chapter
“Operating the appliance”).
Door is not set correctly. Set the door correctly with the aid of the
installation instructions.
Appliance is disconnected from
the mains.
Check mains plug and fuses.
Attach supplied emergency release to upper
right and left of the furniture panel and open
the door by gently pulling the emergency
release.
Door and door seal dirty. Clean door and door seal with a damp cloth
and a little washing-up liquid.
Automatic door opening system
not in home position.
After closing the door, wait one second until
it can be opened again.
Fault Reason Remedial action
Loading ...
Loading ...
Loading ...