Loading ...
Loading ...
Loading ...
Operating the appliance en
25
timeLight (optical display
while a programme
is running) *
timeLight
* depending on the configuration of your
specific dishwasher
While a programme is running, an
optical display (additional programme
information) is projected onto the floor at
the bottom of the appliance door. If the
base panel is pulled forwards or if the
appliance is installed at eye-level flush
with the furniture then this display will
not be visible.
Possible settings of the optical
display:
The setting †:‹‚ is set up at the factory.
Here’s how to change the setting:
1. Switch on ON/OFF switch (.
2. Hold down the programme button
# and then hold the START button
` until •:‹... appears in the display
window h.
3. Release both buttons.
The illuminated display on the button
# flashes.
4. Press the programme button #
repeatedly until †:‹... appears in the
display window h. (for the optical
display) together with the previously
set value, for example †:‹‚.
5. Press the programme button 3
repeatedly until the desired value, for
example †:‹‹, appears in the
display window h.
6. Press START button `.
The set value is saved.
Remaining running time
display
When the programme is selected, the
programme running time is indicated
on the digital display h. When the
programme has started, the remaining
running time is displayed on the floor
(only for settings †:‹‚ and †:‹ƒ).
The running time is determined during
the programme by the water
temperature, the number of utensils
as well as the degree of soiling
and may vary
(depending on the selected
programme).
Timer programming
Timer programming *
* depending on model
You can delay the start of the
programme in 1-hour steps up to
24 hours.
1. Open the door.
2. Switch on ON/OFF switch (.
3. Press button P + until the digital
display h jumps to œ:‹‚.
4. Press P + or – button until the
displayed time corresponds with your
requirements.
5. Press START button `, timer
programming is activated.
6. To delete timer programming, press
the P + or – button until h œ:‹‹
is indicated on the digital display.
You can change your programme
selection at any time until the
programme starts.
7. Close the door.
†:‹‹ The display is switched off.
†:‹‚
/
†:‹ƒ
The display can show the
programme, the timed delay,
remaining time and end of the
programme.
Loading ...
Loading ...
Loading ...