Loading ...
Loading ...
Loading ...
POWER
Switch themain power button on whichislocated on theend of the heater.
After the power is turned on, the computer board emits a ‘click’ and the screen displays the
current roomtemperatureand thesettemperature.
Press theOn\Off key onceto enter thestandby state.
HEAT SETTING
Press the ‘Heat Setting’ button to adjust the heatsetting from 1000W to 1300W to 2300W & ANTI-
FROST.
Inanti-frost: Ifthe heater is instandby and the room temperatureis lower than 5°C, the heater will
automatically turn on to HIGH heating mode. When the room temperature reaches 9°C, the
heating isturned back to standby.This cycle will repeat asrequired.
TEMPERATURE
The set temperatureis displayed every time the applianceis power up. The temperaturecan be set
when the applianceisinstand-byor heating.
Press the‘+’or ‘-’ buttons to setthe desired room temperature.
The temperature rangeis5°C-37°C.
The appliance can hold thelast temperature setting in its memory. This temperature will beshown
ateach start-up.
TIMER
Press the timer button, each time the timeis increased by 1 hour up to 24 hours. Once the timer is
set, the timer countdown starts after 5 seconds. When the set time has elapsed, the heater will go
back into standby mode.
To cancel thetimer,press thetimer button until thedisplay read0h 00m.
Operating your Heater
1. Selected heating level display
2. ‘Fan’ symbol
3. ‘Frost protection’ symbol
4. Selected unit of measurement display
5. Fan button
6. Increase temperature
7. Reduce temperature
8. Timer button
9. Running time display
10. Set temperature display
11. Measured temperature display
12. On/Off button
13. Infrared receiver for remote control
14. Wi-Fi button
15. Heat Setting Button
16. Wi-Fi indicator lamp
Loading ...
Loading ...
Loading ...