Loading ...
Loading ...
Loading ...
Components
ASSEMBLY
Before using the heater, the feet (supplied separately in the carton), must be fitted to the unit. The
screw pack to attach the feet to your heater will be taped to either one of the feet for your heater, or
taped to the plug.
Carefully turn the Main Body upside-down on a scratch-free and
stable surface. Be careful to prevent damage to the cosmetic finish
or your floor surfacing.
Before the appliance can be used, the feet must be s crewed on as
follows:
1. Unpack the appliance from the packaging.
2. Remove the transport packaging.
3. Check that the appliance shows no signs of damage.
4. Slide the feet from the outside into the corresponding supports
on the underside of the heater.
5. Secure the feet firmly using the screws supplied.
WARNING: Operate the heater in the normal upright position only with the feet
attached to the bottom. Any otherposition could create ahazardous situation.
WARNING: Heater must not be used without the feet fitted.
This appliance has been supplied with ‘1 way screws’ for permanent installation of the feet.
This is a safety requirement for the New Zealand and Australian market.
Loading ...
Loading ...
Loading ...