Loading ...
Loading ...
Loading ...
USB upgrade
You can upgrade the software by using USB memory stick.
1
Connect your USB memory stick with the upgrade file to the USB
terminal on the side of your TV.
2
Press MENU and use to select Update software, then press
OK.
3
Use to select USB, then press OK.
4
Use to select the desired update file, then press OK.
5
Use to select Yes, then press OK.
•
Read the on-screen instructions and confirm that you want to
continue with the installation.
Do not remove the USB storage device or turn the TV o
while upgrade is in progress.
Software update is in progress. Please wait.
6
When the software upgrade is completed, press to set the unit into
standby mode, then remove the USB memory stick.
7
Unplug the AC power cord for a few seconds from AC outlet and plug
it again.
8
Press again to turn the unit on.
•
The TV starts up with the new software.
•
For further assistance, please contact call center.
Network updates
You can update the software by connecting the unit to the internet.
1
Press MENU and use to select Update software, then press
OK.
2
Use to select Network, then press OK.
3
Use to select Yes, then press OK.
•
This unit will then start checking for the latest FirmWare (software)
version.
4
Confirmation message will appear.
Use to select Yes, then press OK.
•
The unit will start downloading the latest FirmWare (software)
version.
•
The unit will start updating the FirmWare (software) version.
•
It may take a while to complete the updating.
5
When the software update is complete, press to make sure the unit
goes to standby mode.
6
Unplug the AC power cord for a few seconds from AC outlet and plug
it again.
7
Press again to turn the unit on.
•
The TV starts up with the new software.
For further assistance, please contact call center.
Note(s)
•
Please do not unplug the AC power cord or Ethernet cable while executing the Network
updates.
•
All settings will remain the same even if you update the software version.
•
The version of net service will also be updated if newer version of net service is available when
updating the firmware.
•
When you start up the TV or a net service after executing the software update, a message may
appear on the screen prompting for software update again. In this case, please select Update
to start USB update or network update. For further assistance, please contact call center.
42 .English
Continued on next page.
Loading ...
Loading ...
Loading ...