Loading ...
Loading ...
Loading ...
14
6 Fit the grease filter:
The positioning plate is used to correctly position
the grease filter near the side air outlet. Place the
positioning plate in the ventilation element so that
the central angle is facing the air outlet. Place the
grease filter on the positioning plate.
For downwards air outlet, place the grease filter
without the positioning plate in the ventilation
element. The alignment of the grease filter does not
matter.
7 Plug the control cable of the control unit into the
socket on the control desk. Connect the control
unit and the fan module with the control cable. All
plugs must snap into place. Connect the control
unit and fan module to the mains and check that
they work correctly. If the appliance does not work,
check that the connection cable is positioned
correctly.
8 Flush installation only: it is imperative to test
functioning before jointing!
Joint the surrounding
gap with a suitable, temperature-resistant silicone
adhesive (such as OTTOSEAL
®
S 70). Smoothen
the seal joint with smoothing agent recommended
by the manufacturer. Observe the notes on
processing the silicone adhesive. Do not operate
the appliance until the silicone adhesive has dried
completely (at least 24 hours, depending on room
temperature).
NOTICE: Unsuitable silicone adhesive used on
natural stone worktops will cause permanent
discoloration.
Loading ...
Loading ...
Loading ...