Loading ...
Loading ...
Loading ...
en Basic settings
18
QBasic settings
Ba s i c set t i ngs
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
--------
Changing the basic settings
The function selector must be set to the "Off" position.
1. Press and hold the v button for approx. 4 seconds.
The first basic setting will appear on the display,
e.g. ™‚ ‚.
2. Use the A or @ button to change the setting if
necessary.
3. Press the v button to confirm.
The next basic setting will appear on the display.
4. Using the v button, continue going through all the
basic settings as described above, changing the
settings if necessary using the A or @ button.
5. When you have finished, press and hold the
v button again for approx. 4 seconds to confirm the
settings.
All basic settings have now been applied.
You can change the basic settings again at any time.
Note: Your changes to the basic settings will be
retained even after a power failure.
Basic setting Options
™‚ Length of audible signal dura-
tion upon completion of a
cooking time or timer count-
down
‚ = approx. 10 seconds
ƒ = approx. 30 seconds*
„ = approx. 2 minutes
™ƒ Amount of time until a setting
is applied
‚ = approx. 3 seconds*
ƒ = approx. 6 seconds
„ = approx. 10 seconds
™„ Button tone that sounds when
a button is touched
‹ = off
‚ = on*
™… Brightness of the display illu-
mination
‚ = dark
ƒ = medium
„ = bright*
™† Display time of day? ‹ = hide the time
‚ = display the time*
™‡ Enable childproof lock activa-
tion?
‹ = no
‚ = yes*
ƒ = yes, with locked door**
™ˆ Interior lighting on when
appliance in operation?
‹ = no
‚ = yes*
™‰ Cooling fan run-on time ‚ = short
ƒ = medium*
„ = long
… = extra long
™Š Telescopic rails retrofitted?** ‹ = no* (for rails and single
pull-out system)
‚ = yes (for double and triple
pull-out systems)
™‘ Reset all values to factory set-
tings?
‹ = no*
‚ = yes
* Factory setting (factory settings may vary depending on the appli-
ance model)
** Not available for all appliance types.
Loading ...
Loading ...
Loading ...