Loading ...
Loading ...
Loading ...
www.NutrichefKitchen.com
10
www.NutrichefKitchen.com
11
Common Faults
OTHERS
Security System
•
The appliance has a built-in safety lock. If the stirring cup is not rotating to accurate
position or the lid is not installed properly, the motor will not work. All the parts
should be assembled correctly, the built-in safety lock should be unlocked to make
the motor work properly.
•
The appliance also has overheating protection function. If the interval between two
steaming process is too short or the working time for stirring is too long or there are
too much food in the stirring cup, all of them can cause overheating problems.
CLEAN AND DESCALE THE WATER TANK
The incrustation scale should be removed every week to ensure 100% working
eciency. It can help to reduce the accumulation of incrustation scale, if adding the
puried water or ltering water. Getting rid of the food particles and the
incrustation scale in the water tank, please do the following instruction:
1. Mix a small bag of citric acid (about 10 grams) with the puried water
(about 200ml) into the water tank.
Notes: Use a mixture of 150ml pure water and 50ml vinegar (8% concentration of
acetic acid) to get rid of the incrustation scale from the water tank.
2. Start the "Steam" function, the indicator gets bright then it starts to steam.
3. After steaming for 5-6 minutes and then switch OFF.
4. Empty the used acetic acid (or vinegar) solution from the water tank.
5. Wash the water tank and stirring cup thoroughly with water.
6. Before using the appliance, please add 100ml-200ml watar into the water tank and
start to steam with empty cup for 10 minutes to get rid of some remaining odor.
7. Keep the tank as dry as possible to prevent bacterial growth.
FAULT ANALYSIS AND DIAGNOSIS
The chapter summarizes the problems we most probably face. If the problems can
not be solved under the following information, please contact the customer service
center nearby.
Initial Failure
120V?
Loading ...
Loading ...
Loading ...