Loading ...
Loading ...
Loading ...
63
With the Direct Command feature, you can perform various functions (e.g., unlock a door) from your phone. This
feature is Only Available for a single-family residence or manger’s phone sharing a phone line with the unit.
The "No Phone Bill" (NPB) feature Does Not dial a separate number to reach you in your residence. The unit
essentially functions as an intercom with your residence touch-tone phone. Therefore, the NPB does not generate
monthly or per call telephone charges.
NPB / SINGLE FAMILY RESIDENCE ONLY
Enable or Disable Direct Commands: 21
1
Press Then
2
Enable (1) or Disable (0). Then (#)
When enabled, you can control the system’s relays from your touch-tone phone.
Factory Setting: Enabled.
1 2
Disables the direct commands.
Speaking Through the Unit (Intercom Mode): 120
1
Press (from the residence phone). If you are in the programming mode, go to
next step.
2
Press Then
Initiate communications from a telephone through the unit at any time to greet visitors, ward off
vandals, etc.
You may use the activate door 1 relay(s) or hang-up key after entering step 120.
See visitor call response keys on page 56.
EXAMPLE:
DIRECT COMMANDS FROM THE PHONE
Loading ...
Loading ...
Loading ...