Loading ...
Loading ...
Loading ...
32
1 2 3
4
5
4A
4B
5B
5A
Year Month Day
24-Hour Time
Add/Modify DnD and Call Forwarding Information for the Resident (NPB) or manager. Do Not Disturb (DnD)
Schedules prevent visitors from calling the Resident (NPB) or manager phone during specified time frames. Call
Forwarding redirects visitor calls to an outside telephone number instead of ringing the Resident (NPB) or
manager phone. During a Call Forwarding call, the visitor will hear normal telephone line sounds but will not hear
the number being dialed. You can Enable or Disable, individually, the DnD and Call Forwarding features for the
Resident (NPB) or manager phone.
Factory Setting: DnD Control Setting is Disabled (0); Call Forwarding
Control Setting is Disabled.
1
Press
Then
Set DnD Control Setting, Enabled (1) or Disabled
(0). Then (#).
3
Enter Do Not Disturb Schedule (0-63). Then (#).
4
Set Call Forward Control Setting, Enabled (1) or
Disabled (0). Then (#)
5
Enter Call Forward Schedule (0-63).Then (#)
Activate or deactivate Directory Codes. Also activate or deactivate specific dates and times for those Directory
Codes.
Activate / Deactivate a Directory Code:
1
Press Then
2
Enter Directory Code (1-4 digits). Then (#)
3
Activate Directory Code, (Enable-1 or Disable-0). Then (#)
4
Use Start Activation Date, (Enable-1 or Disable-0). Then (#)
4A
Start Date (yymmdd). Then (#)
4B
Start Time (hhmm). Then (#)
76A65432
1
The DnD Control Setting is Enabled and uses Schedule "34". It also Enables Call Forwarding
which uses Schedule "22". Call Forwarding uses Phone Number "976-5000" with Extension
"1136" and waits "20" seconds before dialing the Extension.
To Activate or Deactivate a Directory Code:
5
Use End Deactivation Date, (Enable-1 or
Disable-0). Then (#)
5A
End Date (yymmdd). Then (#)
5B
End Time (hhmm). Then (#)
NOTE: All time must be entered using a 24-hour
format (8am=0800, 3pm=1500 etc.).
Disabling the Activate Directory Code
3
, the Directory Code will always be deactivated. If you enable the
Activate Directory Code
3
, then the four If statements could apply:
1. If you disable the Start Activation Date
4
and disable the End Deactivation Date
5
and omit all dates and
times, the Directory Code will immediately become active and stay that way until the code is deactivated or
deleted.
2. If you enable the Start Activation Date
4
and add only a "Start Date and Time"
4A
4B
and disable the End
Deactivation Date
5
, the Directory Code will activate on that "Start Date and Time".
3. If you disable the Start Activation Date
4
and enable the End Deactivation Date
5
and add only an "End Date
and Time"
5A
5B
, the Directory Code will deactivate on that "End Date and Time".
4. If you enable the Start Activation Date
4
and add a "Start Date and Time"
4A
4B
enable the End Deactivation
Date
5
and add an "End Date and Time"
5A
5B
, the Directory Code will activate on that "Start Date and Time"
and deactivate on the "End Date and Time".
6
Only Enter New Call Forward Phone Number (up to 20
digits). Then (#) (Skip this step to keep existing Call
Forward Phone Number.)
6A
Enter Call Forward Phone Extension (up to 5
digits). Then (#) (If using an extension the unit
MUST have a phone number.)
7
Enter Call Forward Extension Delay (0-30 sec.). Then (#)
2
EXAMPLE:
Directory Code "33" is activated on February 1st, 2016 at 6pm.
EXAMPLE:
ADD / MODIFY RESIDENT DND AND/OR CALL FORWARDING: 49
ACTIVATE OR DEACTIVATE A DIRECTORY CODE: 45
Loading ...
Loading ...
Loading ...