Loading ...
Loading ...
Loading ...
Engine Oil
2. Open the hood and remove the
engine oil fill cap. Remove the oil
drain bolt from the bottom of the
engine. Drain the oil into an
appropriate container.
3. Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
Honda dealer) is required to
remove the filter.
4. Install a new oil filter according to
instructions that come with it.
5. Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten it to:
4
4
N.m (4.4 kg-m , 32 Ib-ft)
6
. Refill the engine with the recom-
mended oil.
Engine oil change capacity
(including filter):
(US: DX, LX, Canada: LX)
3.8 (4.0 US qt, 3.3 Imp qt)
(US: EX, Canada: EX-R)
4.3 (4.5 US qt, 3.8 Imp qt)
7. Replace the engine oil fill cap.
Start the engine. The oil pressure
indicator light should go out within
five seconds. If it does not, turn off
the engine and reinspect your
work.
8. Let the engine run for several
minutes and check the drain bolt
and oil filter for leaks.
9. Turn off the engine, let it sit for
several minutes, then check the oil
level. If necessary, add oil to bring
the level to the upper mark on the
dipstick.
Maintenance
WASHER
DRAIN BOLT
OIL FILTER
ProCarManuals.com
Loading ...
Loading ...
Loading ...