ElectriQ A1/EIQ-AM09W GRADE A1 - 24 inch SmartApp WIFI Hot and Cool Bladeless Fan with Mood Light

User Manual - Page 4

For A1/EIQ-AM09W.

PDF File Manual, 21 pages, Read Online | Download pdf file

A1/EIQ-AM09W photo
Loading ...
Loading ...
Loading ...
Page 4 of 21
The heater is designed to be used at temperatures above -20°C. If it is exposed
to temperatures below this, it must be allowed to warm above this level before
operation.
Do not attempt to repair, disassemble or modify the appliance. This unit contains
no user-serviceable parts.
Always unplug or disconnect the appliance from the mains power supply when not
in use, or when moving or cleaning it. Do not pull the cord to unplug the heater.
Keep the heater clean. Do not allow any object to enter the ventilation or
exhaust opening as this may cause electric shock, fire or damage to the heater.
Do not use the appliance for anything other than its intended use. It is designed
for domestic indoor use only.
There may be a trace of odour during the first few minutes of initial use or after a
period of storage. This is normal and will quickly disappear.
This appliance has hot and arching or sparking parts inside. Do not use it in
areas where gasoline, paint, or any flammable liquids are used or stored.
This appliance is not intended for use in bathrooms, laundry areas and similar
humid locations. Never locate this appliance where it may fall into a bathtub or
otherwise become exposed to water.
The remote contains a lithium battery, keep out of reach of small children. Seek
Medical advice if swallowed.
To prevent battery leakage: Remove the battery from the remote if exhausted or
before long periods of storage.
The heater is designed to heat the room to 25C by default. When the
temperature has been reached, the unit will stop heating until the temperature
drops. The desired room temperature can be adjusted using the app.
ENERGY SAVING AND UNIT SAFETY PROTECTION TIPS
Do not cover or restrict the airflow. Do not use in dusty environment.
For safety and maximum performance the minimum distance from a wall or
objects should be 50cm.
WARNING: To reduce the risk of fire or electrical shock DO NOT use this appliance
with any solid state Speed Control Device or any variable speed controllers.
Loading ...
Loading ...
Loading ...