Loading ...
Loading ...
Loading ...
1. Make sure the marker on Variable Speed dial is at “0” position.
2. Push the On/Off Switch up to On position, then slowly increase to the desired speed between 1 and
10during the blending cycle.
3. During blending, you can push the High/Variable Switch up to High position for the highest speed of
blending and turn it back to Variable position for using Variable Speed Dial again.
4. To stop blending, turn the marker on Variable Speed Dial to “0” and blender will enter standby mode.
Push the On/Off Switch down to Off and blender will power off.
Note:
Make sure that the marker on Variable Speed Dial is pointed to “0” after each use.
* If ingredients are not blending properly, use a tamper to help push ingredients towards blades. If this
does not work, press On/Off to Off position to power off. Remove the container from the blender base
and use a rubber spatula to press the air bubble away from the blades. Add liquid if necessary. Replace
the lid and lid plug. Replace container to the motor base and continue blending.
9. When blending is complete, turn off and unplug the appliance. Wait for the blades to completely stop
spinning.
CAUTION: Make sure that the motor base is unplugged when not in use.
10. To remove the container from motor base, lift it off the motor base.
WARNING: Be sure to wait for the unit to come to a complete stop before removing the container from the
base or the lid from the container.
11. To remove the lid, lift up on one lid flap while holding the container securely. The container can then be
emptied. If hot ingredients were blended, carefully hold the container handle, then place the container on
a flat surface.
FAQ
USING VARIABLE SPEED DIAL
2. How to determine the tamper is suitable for your blender?
Remove the lid plug and insert the tamper through the lid plug opening. The tamper should fit easily into
the opening. It should not come into contact with the blades no matter where you move the tamper inside
the container.
CAUTION
Moving Parts May
Become Hot with
Extended Use.
DO NOT touch.
- 11 -
Loading ...
Loading ...
Loading ...