Loading ...
Loading ...
Loading ...
−
15
Gauges, Indicators & Displays
Instruments & Controls
Lamp
Check.
Lamp Check When applicable, the high beam and
neutral indicators come on when you turn
the ignition switch ON and remain on until
you select the low beam or shift out of
neutral.
These indicators are identified in the table
on pages with the words:
If one of these indicators does not come
on when it should, have your dealer check
for problems.
The low oil pressure indicator comes on
when you turn the ignition switch ON so
you can check that it is working. The
indicator remains on until after the engine
is started.
The PGM-FI malfunction indicator lamp
(MIL) lights for a few seconds and then
goes off when you turn the ignition switch
ON and engine stop switch is at RUN.
The Anti-lock Brake System (ABS)
indicator comes on when you turn the
ignition switch ON. This indicator goes
off after you ride the motorcycle at a
speed above 6 mph (10 km/h).
20 22
(CB1000R ABS only)
１０／１２／１３ ０９：３３：２１ ３１ＭＦＮＡ００ ００２４
Loading ...
Loading ...
Loading ...