Loading ...
Loading ...
Loading ...
11
EN
1. You need to enter in ‘My Devices’ , choose the purifier that you want to share, click on
‘share by email’. Enter the email of the new user, click on ‘OK’
2. You need to enter in ‘my devices’, choose the purifier that you want to share; you can see
the ‘QR code‘of your purifier.
The new user needs to enter in ‘my devices’, and click ‘+’ in order to add new product,
choose ‘scan the QR code’. To scan the ‘QR code ‘on your screen.
The scheduling does not work:
If the time slot is earlier than current time, by default the product will start next day.
Why the pairing does not work?
Supported encryption type : WPA_1/WPA_2, TIPK, PSK, AES,
Supported networks: 2.4 GHz (not 5Ghz)
I go on vacation and I let my purifier on. If my home Wi-Fi stops working
during this time, I can’t control my purifier via the app anymore.
Don’t worry. If the product lost Wi-Fi connection for longer than 24 hours, the appliance will
stop automatically.
MAINTENANCE
Always switch the appliance o with the button (10) and unplug it before conducting any maintenance
operation.
You can clean the appliance with a slightly damp cloth.
IMPORTANT: Never use abrasive products which could damage your appliance’s appearance.
FILTERS
Filter Action Cycles
Pre-lter Clean Every 2 to 4 weeks
Active carbon lter Replace Every 12 months
True HEPA Allergy+ lter Replace Every 2 years
NanoCaptur lter Replace
Color changing
(see Color chart on filter)
This data is based on an average use in the appliance of 8 hours per day at the lowest speed of
AutoDay mode.
The recommended frequency for cleaning and replacing the filters may vary depending on
the duration of use and the operating environment.
• A light indicates when a filter needs to be replaced (control panel light 2).
• The NanoCaptur filter contains translucent granules which change color according to the
formaldehyde absorption rate. Refer to the color chart on the sticker inside the front door or
the filter itself to establish the filter saturation rate.Once the saturation rate has reached its
maximum, the filter must be replaced. You have to check the filter saturation rate every six
months.
• The pre-filter can be re-used: remove the dust using a vacuum cleaner or wash with water.
CAUTION:
• The appliance’s efficiency can be reduced if the pre-filter is not cleaned regularly.
• Never use a pre-lter that is still damp.
• The pre-lter is the only lter which can be re-used and washed with water. The particle, Nano-
Captur and active carbon filters cannot be cleaned and re-used. Never wash with water.
Loading ...
Loading ...
Loading ...