Loading ...
Loading ...
Loading ...
CONTROL PANEL
Operating Your Dehumidifier
Press POWER button and the unit will start in continuous dehumidification mode. (The POWER
button also allows you to turn the unit Off).
Note that if the appliance has been operating for more than 10 minutes when you switch itoff
it will change to CONTINUE mode and run for approximately 5 minutes to cool the unit before
switching off.
The alarm willalso sound 3 times and the control panel will identify the unit’s status.
MODE FUNCTION
Select the desired fan speed bypressingthe MODE button.
L (Quietest dehumidification) setting.
M (Normal dehumidification) setting.
H (Fast dehumidification) setting.
The LED indicator light will illuminate to identify the current status.
HUMID FUNCTION
The appliance willdefault to continuous operation when itis first turned on.
Room humidity ratio (40%/50%/60%) can beset bypressing the Humid button.
When 40% is set: The humidistat will detect if the room relative humidity (RH) is lower ≦38%
and the unit will automatically turn the dehumidification process off. The LED light showing
that the 40% will also go out.
When 50% is set: The humidistat will detect if the room RH is lower ≦48% and the unit will
automatically turn the dehumidification process off. The LED light showing that the 40% will
alsogo out.
Like wise for the 60% setting.
The fan will continue to run to draw air over the humidistat to sense when the humidity
changes.
The CONTINUE setting will attempt to remove all humidity from the room.
Loading ...
Loading ...
Loading ...