Loading ...
Loading ...
Loading ...
6 7ninjakitchen.com
Read all instructions before using your
NUTRI NINJA®
WITH FRESHVAC™ TECHNOLOGY
When using electrical appliances, basic safety precautions should always
be followed, including the following:
WARNING
To reduce the risk of fire, electric
shock, serious injury, death, or
damage when using this appliance,
follow these basic safety precautions.
GENERAL PRECAUTIONS
31 Keep hands and utensils out of
containers while chopping to
reduce the risk of severe personal
injury or damage to the blender/
food chopper. A scraper may be
used ON LY when the blender or
processor is not running. When
using the processor, always use
food pusher to add food. NEVER
add food by hand.
32 NEVER operate the appliance
without lids and caps in place.
DO NOT attempt to defeat the
interlock mechanism. Ensure the
container and lid are properly
installed before operation.
33 DO NOT expose the containers
and accessories to extreme
temperature changes. They may
experience damage.
34 NEVER leave the appliance
unattended while in use.
35 DO NOT open lid or pour spout
cap while blender is operating.
36 DO NOT blend hot liquids. Doing
so may result in pressure buildup
and steam exposure that can pose
a risk of the user being burned.
37 If you find unmixed ingredients
sticking to the sides of the the cup,
stop the appliance, remove the
lid, and use a scraper to dislodge
ingredients. NEVER insert your
hands into the pitcher, as you may
contact one of the blades and
experience a laceration.
38 DO NOT attempt to remove the
container and lids from the motor
base while the blade assembly is
still spinning. Allow the appliance
to come to a complete stop before
removing lid and container.
39 Upon completion of blending
or processing, ensure the blade
assembly is removed BEFORE
emptying container’s contents.
Remove the blade assembly by
carefully grasping the top of
the shaft and lifting it from the
container. Failure to remove the
blade assembly before emptying
the container results in a risk
of laceration.
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
40 Remove the Pro Extractor Blades
®
Assembly from the Single-Serve
Cup upon completion of blending.
DO NOT store ingredients before
or after blending them in the cup
with the blade assembly attached.
Some foods may contain active
ingredients or release gases that
will expand if left in a sealed
container, resulting in excessive
pressure buildup that can pose
a risk of injury. For ingredient
storage in the cup, use only
Spout Lid to cover.
41 If the appliance overheats, a
thermal switch will activate and
temporarily disable the motor. To
reset, unplug the appliance and
allow it to cool for approximately
30 minutes before using again.
42 The maximum wattage rating for
this appliance is based on the
configuration of the Pro Extractor
Blades Assembly and Single-Serve
Cup. Other configurations may
draw less power or current.
43 DO NOT process dry ingredients
without adding liquid to the Single-
Serve Cup. The Single-Serve Cup is
not intended for dry blending.
44 To protect against risk of electrical
shock, DO NOT immerse the motor
base in water or other liquid.
DO NOT spray the motor base with
any liquids. Turn o and unplug
the motor base before cleaning.
45 WARNING: The maximum wattage
rating for this appliance is achieved
by mixing 350g dried soy beans
with 50g oil on “start/stop” for 15
seconds. Other recipes may draw
less power or current. The unit is
NOT intended for dry blending.
46 DO NOT operate pump
during blending.
47 DO NOT operate pump
upside down.
48 DO NOT immerse pump in water
or any other liquid.
49 DO NOT incinerate this appliance
even if it is severely damaged. The
batteries can explode in a fire.
SAVE THESE INSTRUCTIONS
Loading ...
Loading ...
Loading ...