Loading ...
Loading ...
Loading ...
Servicing Your Honda 33
Subframe
2. Make sure the carburetor tab (4) aligns with
the air cleaner connecting tube groove (5).
3. Tighten the connecting tube clamp screw (6)
so the gap between the tabs of the clamp is
0.1 ± 0.04 in (3 ± 1mm).
(4) carburetor tab
(5) air cleaner connecting tube groove
(6) connecting tube clamp screw
4. Connect the crankcase breather tube (7).
5. Route the transmission breather tube (8) into
the air cleaner housing.
(5)
(4)
(6)
0.1 ± 0.04 in (3 ± 1 mm)
Installation
1. Loosely attach the upper and lower ends of
the subframe (1) to the mainframe while
connecting the air cleaner connecting tube to
the carburetor.
Be careful not to bend the subframe.
Install the subframe upper mounting bolt (2)
and lower mounting bolts (3).
Tighten the upper mounting bolt and lower
mounting bolts to the specified torque:
22 lbf·ft (30 N·m, 3.1 kgf·m)
(1) subframe
(2) subframe upper mounting bolt
(3) subframe lower mounting bolts
(2)
(1)
(3)
6. Install the seat (page 29).
7. Install the muffler (pages 86).
(8)
(7)
(7) crankcase breather tube
(8) transmission breather tube
Loading ...
Loading ...
Loading ...