Loading ...
Loading ...
Loading ...
5EN
3 Get started
Charge the battery
Note
• Before you use your headphones for the rst time,
charge the battery for 5 hours for optimum battery
capacity and lifetime.
• Use only the original USB charging cable to avoid any
damage.
• You can operate the headphones normally during
charging.
• Normally, a full charge takes 2 hours.
• When the battery level is low, the white LED will ash.
Connect the supplied USB charging cable to:
• the micro USB charging port on the
headphones and;
• the charger/USB port of a computer.
Pair the headphones with
your mobile phone
Before you use the headphones with your
mobile phone for the rst time, pair it with a
mobile phone. A successful pairing establishes a
unique encrypted link between the headphones
and mobile phone. The headphones store the
last 8 devices in the memory. If you try to pair
more than 8 devices, the earliest paired device
is replaced by the new one.
There are two ways to pair your headphones
with your mobile phone:
• Manual pairing
• NFC pairing
Manual pairing
1 Make sure that the headphones are fully
charged.
2 Press and hold to turn the headphones
on.
» For previous device pairing, the white
LED ashes once and the blue LED
ashes.
» For new device pairing, press and hold
until the blue and white LED ashes
alternately.
3 Turn on the Bluetooth function of your
mobile phone.
» The headphones are in pairing mode
for 5 minutes.
4 Pair the headphones with the mobile
phone. For detailed information, refer to
the user manual of your mobile phone.
NFC pairing
1 Make sure you turn on the NFC function
on your phone and your phone’s screen
remains active.
2 Place your phone over the headphones
so that the NFC detection area of each
device can touch each other.
3 Pair the headphones with the mobile
phone. For detailed information, refer to
the user manual of your mobile phone.
Note
• Make sure your mobile phone has the NFC feature
available and switched on.
• Make sure your mobile phone is not in standby mode.
• Pairing with NFC is only suitable for Android mobile
operating system 4.2 or above.
• Refer to the user manual of your mobile phone to
identify its NFC detection area.
The following example shows you how to pair
the headphones with your mobile phone.
1 Activate the Bluetooth feature of your
mobile phone, select Philips SHB8850NC.
2 Enter the headphones password "0000"
(4 zeros) if prompted. For those mobile
Loading ...
Loading ...
Loading ...