User Manual Philips SHB8850NC/00 Wireless Noisecancelling Headphones

Bluetooth is designed for high-interference environments, and it is more robust than many wireless technologies. However, you can get some interference from appliances such as cordless phones, Wi-Fi network equipment, and microwave ovens. If you experience interference between your headset and a paired device, go closer to the paired device and remove any obstacles between the headset and paired device. Devices with Bluetooth version 1.2 or higher use a technology caused ?adaptive frequency hopping?. Bluetooth automatically hops away from frequencies with lots of interference towards frequencies with less interference. Bluetooth radios can switch frequency 1,600 times per second. The data packets are so small that interference from other RF sources is not likely.

Yes, you can use the Active Noise Cancellation (ANC) function according to the below steps: 1. Insert the supplied audio cable to the jack of your headphones; 2. Turn on the headphones; 3. Turn on the Active Noise Cancellation (ANC).

The control panel and buttons only work on Bluetooth mode. Buttons on your phone or control keys in your music playing app/programme should be used when you use audio cable.

Multi-point allows you to connect your Philips Bluetooth headphones with two Bluetooth-enabled devices simultaneously. Simply pair up the two devices to enjoy movies and music while effortlessly taking calls in between.

To pair your headphones with two Bluetooth-enabled devices:
Pair the first Bluetooth-enabled device with your headphones.
Turn off the Bluetooth of the device
Turn off your headphones.
Pair the second Bluetooth-enabled device with your headphones.
Turn off the Bluetooth of the second device.
Turn off your headphones.
Note: Refer to the user manual for pairing steps.

To use:
Turn on your headphones.
Turn on the Bluetooth of either of the two paired devices.
When Bluetooth connection is made, there is a voice prompt from the headphones.
Turn on the Bluetooth of the other Bluetooth device.
When Bluetooth connection is made, there is a voice prompt from the headphones.
To switch between the two devices, use the buttons on them.

Use a soft cloth (dampened with a minimum amount of water or diluted mild soap if necessary) to clean the product. To avoid damage or malfunction: * Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives * Do not submerge the product in water * The headphone shall not be exposed to dripping or splashing