Loading ...
Loading ...
Loading ...
©2019 Hestan Commercial Corporation
4
EN
PART REPLACEMENT - TYPICAL DRAWER (CONTINUED)
3. Remove the textured panel insert by
removing all the internal screws as
shown in Fig. 4.
4. Re-assembly is the reverse process.
It is recommended to install all
screws by hand, and NOT use a drill-
driver or screw gun. It is very easy
to strip the threaded holes.
Reinstall the drawer by aligning the
slides on either side and push the
drawer back into the opening. You
will hear the release levers click.
Open and close the drawer a few
times to check for proper function
and alignment.
FIG. 4
PART REPLACEMENT - PAPER TOWEL DISPENSER
1. For the AGPTD16 Paper Towel Dispenser, slightly close the door and remove 2 hidden screws
(shown in red) and the door stop (shown in green). The door will open further, exposing the
inner walls of the box.
Loading ...
Loading ...