Loading ...
Loading ...
Loading ...
EN
1
11
USE
Control board
Key Function Display
A
Switches the motor on/off at the latest selected speed Indicates the selected speed
B
Decreases the suction speed. -
C
Increases the suction speed. -
D
By pressing this key it is possible to start the intensive
speed from any previously selected speed. This speed
has been timed at 6 minutes. After that time the system
activates automatically the latest selected speed. This
function is recommended for cooking condition where
vapours and odours need to be eliminated immediately
and quickly.
HI and the remaining time appear alternately.
By pressing this key for about 5 seconds , with all the
loads turned off (Motor and Lights), it is possible acti-
vated or deactivated the Charcoal Filter alarm.
Show “FC” + (2 Flashes of a dot) – activated
Show “FC” + (1 Flashes of a dot) – deactivated
E
By pressing this key it is possible to set up the motor to
a suction speed at 100 m
3
/h. During the intensive speed
or the Delay-function this function cannot be activated.
24 appears and the spot down at the right side flash-
es once a second.
By pressing the key the function is stopped.
F
By pressing this key it is possible to set the delayed
shutdown of the hood to 30 minutes. This function is
suitable for a complete elimination of residual cooking
odours. Functioning only when the motor is on(not
during the 24H-function or intensive function)
The suction speed and a dot flash once a second.
By pressing the key the function is stopped
Pressing and holding the button for 5 seconds enables
the remote control.
Pressing and holding the button for 5 seconds disables
the remote control
Show “IR” + (2 Flashes of a dot) – activated
Show “IR” + (1 Flashes of a dot) – deactivated
G
By pressing this key for about 3 seconds it is possible to
reset the filter saturation alarm.
Flash “FF” three times.
After 100 working hours a FG appears. Metal grease
filters have to be washed.
After 200 working hours FC appears. Charcoal
filters have to replaced.
H
By pressing this key the intensity of the lighting system
can be decreased.
I
Switches on/off the lighting system at the maximum
intensity.
L
By pressing this key the intensity of the lighting system
can be increases.
Keyboard lock: it is possible to jam the keyboard when, for example, cleaning the glass. The motor and lights are
switched off. By pressing for about 5 seconds the A-key the keyboard block can be activated and “00” flash once or deac-
tivated “00” flash Twice. This function is confirmed by moving motor LEDS on display.
Loading ...
Loading ...