Loading ...
Loading ...
Loading ...
Page 8
SET UP & USE
OPERATING INSTRUCTIONS
Place the heater on a rm, level surface and plug the unit directly into a 120 V AC
electrical outlet.
NOTE: Only operate heater in upright position.
1. Turn the heat control knob clockwise (right) from the OFF position to the LOW or
HIGH (1500 watts) heat settings. For Fan Only operation without any heat turn to
the FAN setting.
2. To adjust the thermostat, turn the thermostat knob clockwise (right) from the
MIN position to the MAX position to increase the temperature. When the desired
temperature is reached lower the thermostat setting until the heater stops
operating by turning the thermostat knob to the MIN position.
The power indicator light turns on when either the, FAN, LOW or HIGH setting is
selected.
NOTE: Turning the THERMOSTAT control knob clockwise will increase the
temperature setting.
Turn the fan/heat control knob to “OFF” to shut off the unit.
Thermostat Fan/Heat control knob
Loading ...
Loading ...
Loading ...